Audio Note AN-K Bedienungsanleitung PDF herunterladen (Seite 37)

www.AudioNoteKits.com

Page 37

Section 11: Speaker Post Connections

Move the output transformers out of the way a little so we

can install speaker posts in the rear of the chassis.

We are going to install the 3 speaker

posts that go in the rear of the chassis.

Locate the 3 holes that are in a row.

Position the 2 red speaker posts on

the top 2 holes and the black speaker

post on the bottom hole – the speaker

posts are 8 (red), 4 (red) & 0 (Black).

Now take the three leads from the

output transformer (green, blue and

purple) and trim them so that they will

connect easily to the speaker posts –

remember the transformer has been

“moved” out of position so that we can

work back here.

Strip the ends and tin the wire leads.

Take the ground lugs provided and

place on the ends of the tinned wire.

Solder the lugs in place (place your

soldering iron on the side closest to

the RING). You can use plenty of

solder and make sure there is a nice

smooth flow.

Position the rings on to the speaker

post – GROUND on the black, blue on

the middle and purple on the top.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Keine Kommentare

Audio Note AN-K Bedienungsanleitung Seite 37